injection pump 200tdi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

gee1599

New Member
Posts
60
Location
Crawley West-Sussex
im trying to get the diaphram out of my fuel pump (bosch ve) it turns moves up and down but will not come out :mad: has any one come a cross this ?? i need to get it out as the diaphram has a hole in it
 
never seen one, but has the unit got a case that sits around it that has any screws or bolts you can see.
 
ive had one out of one before it just lifted out but mine is stuck some thing holding it in (poss the fuel pin ) i dont wont to leaver it out or anything like that
 
i was thinking the same thing ???? im going to try deadjusting the throttle and winding the inle speed screw out and then see if it comes out ??? i will let you know how i get on
 
Hi,
I am not sure how this works or when I write this how to get information back but here goes.
Anyone,
I have a diesel leak on my injection 200tdi pump and have traced it to a bolt head on the cam case end and just above the three-bolt collar.
So I had another go at finding the source of the leak and traced it to the this bolt head I just need a little more guidance before I rip it all apart.
  1. Is this some sort of tell, that when diesel leaks from it the pump is wrecked?
  2. Or do I just take the pump off and tighten the bolt with a new washer?
  3. What is the significance of the bolt?
Col T
 
Back
Top