Disco 2 Identification of part

I think bearings have gone on an idler. Before I can order a new part, I need to identify the name of the part. It is one of the pulleys the auxillary belt goes around. It has no AC or ACE and is the pulley furthest away from the tensioner and nearest to the air filter. Can anyone provide me with the name or part number?

err6658 for pulley or err6949 for whole assembly

Thanks, James. Is the pulley easy to remove, or would it be easier to buy the whole assembly?

should come off reasonably easy ,depends if bearing has damaged the spigot,but id get a belt too

Can I just confirm. I have searched for err6493 and the idler pulley comes up. On some sites, it shows all pulleys and the arrows point to one of the other pulleys, which is near the cylinder head. Are the two pulleys the same?

my mistake err66568 is the one you want

Thanks. I have just done a search for err66568 and nothing is founds. On the previous number you recommended with the assembly, the assembly looked to be the correct one.

try err6658 a typo previous

jamesmartin said:

try err6658 a typo previous

Click to expand...

put your glasses on!!! or to many late nights on here!!! lol

discodrivercumbria said:

put your glasses on!!! or to many late nights on here!!! lol

Click to expand...

they were on

Thanks, James.

New pulley due tomorrow. Tested the bolt and it undid very easily. Hopefully should be straight forward. What should I torque the bolt to?

id just nip it up with some loctite

Job complete. Took minutes to do. Noise has now disappeared. Thanks for all advice.