I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Do you design electronic circuits too? I am currently working on a design from the 70's but adapting it to modern components as I cannot get the older pre-made coils etc. I managed to get 6 air capacitors for the tuning circuits but getting the decade box will help to set the transistor biasing after the initial calculations.
Yep. Eye play wiv electronics which is why eye like lectrical/lectronic decision making problems on cars.
 
I click on the Mozilla thingy on the bar at the bottom of the screen. Then it all swings into action. my email ands in @btinternet.com
So I speck it is more like 2.
Right so yer using mozilla's firefox web browser to see yer email online. Have a look at these links below. What yer need to do is add the lz enail to yer safe sender list. If its in the spam sender list then remove it from there.



The email is [email protected] but yer may be able to safe list @landyzone.co.uk
 
Right so yer using mozilla's firefox web browser to see yer email online. Have a look at these links below. What yer need to do is add the lz enail to yer safe sender list. If its in the spam sender list then remove it from there.



The email is [email protected] but yer may be able to safe list @landyzone.co.uk
I'm having a bash at this and waiting to see if it works.
Ta, mate!:):)
 
Do you design electronic circuits too? I am currently working on a design from the 70's but adapting it to modern components as I cannot get the older pre-made coils etc. I managed to get 6 air capacitors for the tuning circuits but getting the decade box will help to set the transistor biasing after the initial calculations.
Ive been resisting for decades, but it hasn't done me any good. :D
 
Eye found a decade resistance box in weee pile at wuk and gorrit.
I wonder if this is watt I was looking for when I built my DIY distributor tester. The only problem was finding sufficient variable ome things to make the motor go faster or slower.
I had to keep putting resistors in the circuit and I only had one variable one, ("rheostat?"). They didn't like it an got 'ot.
Sort of worked but this fing looks a lot betterer!:):):)
 
Right so yer using mozilla's firefox web browser to see yer email online. Have a look at these links below. What yer need to do is add the lz enail to yer safe sender list. If its in the spam sender list then remove it from there.



The email is [email protected] but yer may be able to safe list @landyzone.co.uk
Amazingly I seem to have got it to work.
So ta muchly my @Hippo friend!!!!!:):):):):)
 
ZLOvpRh.jpeg
 
I wonder if this is watt I was looking for when I built my DIY distributor tester. The only problem was finding sufficient variable ome things to make the motor go faster or slower.
I had to keep putting resistors in the circuit and I only had one variable one, ("rheostat?"). They didn't like it an got 'ot.
Sort of worked but this fing looks a lot betterer!:):):)
They easily get hot as they're not designed to take a lot of current. As yer wind down the resistance, the current goes up if the voltage stays the same. Hence burning them oot easily.
 
Eye went to the British motor museum at Gaydon yesdi to see the 75 years of Freelandering celebrations. LR was there showing oft their new tratter going over metal frames. Lot's of old pre production Freelander's there including a propper one, a meastro mule van. Number of clubs there anorl. Loads of tratters wiv silly looking bolt on bling. Went for a wander inside both buildings to see the old vehicles. There's a cinema showing old type British Pathe style films. It's dark in there. Ideal chance to have a sit down and a quick nap.
 
Back
Top