I got a brake accumulator anr2239 and it failed. I bougth a used one but I got an anr2238.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
J

Javier Elizondo

New Member
Posts
6
Location
Costa Rica
I installed the brake block in my car and it Works. But, the brake ligth is on all the time. Does any body knows if changing the block anr2239 by the block anr2238 produces this problema?
 
Welcome to the forum
wave.gif
 
Sorry I didn´t mention the car. It is a range rover P38 4.6 liters. I fit the anr 2238 block and the car is braking now, but the brake ligth is on all the time. I ask if the change of the block anr2239 by the anr2238 produces this problema with the brake ligths
 
Yer would be better to ask yer question int range rover section int link above. This section is fer introductions only. Not many range rover owners come in ere.
 
As mentioned above best to post in the range rover section
but from what I know anr 2238 is early no traction control and anr 2239 is up to my99 two wheel traction control so may not be interchangeable and you must bleed the brakes by following the procedure in Rave to the letter.
 
You must log in or register to reply here.

Similar threads

A
Combusting wires - one big FUBAR
Replies
7
Views
591
amsthenovice
A
B
P38A P38A 1996 4.6 Auto HSE EAS slow to lower and rise + random height change to extended height + compressor running too frequently.
Replies
9
Views
1K
Datatek
Datatek
DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
608
miktdish
miktdish
ukadamwest
P38A Farewell to another P38.. or hello ?
Replies
18
Views
2K
Grrrrrr
Grrrrrr
D
Jaguar XF engine into a gen 2 Disco 4
Replies
8
Views
2K
tyregeezer
tyregeezer
Back
Top