How to stop diesel without cable

Hi all, might be a stupid question, but as a newbie to diesel series Landy's, How do you stop the engine if there's a problem with stop cable ( if snapped or come loose ), is it as simple as put something over air intake to starve engine ?
Think this will be useful for other newbies.

Thanks

Drop the clutch in 3d and stall it
Or operate the stop manually at the other end of the cable

Show it a picture of a EV Evoque

kermit_rr said:

Or operate the stop manually at the other end of the cable

Click to expand...

^^ this one. the cable just operates a lever on the side of the injector pump. just move this by hand.

Yep, thanks, the dash where the stop cable fits has been cracked/broken & bodged by previous owners.
Good to know there's a few options if it goes, will get replacement in time, but getting it on the road cost more than I'd budgeted. .

The ignition barrel with the cable ‘holder’ is no longer made. Hope it’s not this that’s caput. I had a horrible time butchering one together after the scrotes smashed my barrel to nick the thing.

That supplier in Cyprus that has all the MOD gear was charging £800 for one

Yep, that bits fine thankfully, it's where it tightens into the plastic, previous owner's over tightened everything in dash & plastic has cracked everywhere, had to use 2 molegrips to undo most, ( back bit involved a lot swearing, shouting, & bloodied knuckles )

£800

Bobsticle said:

That supplier in Cyprus that has all the MOD gear was charging £800 for one

Click to expand...

At that price I would be fitting a standard ignition barrel and using a tractor stop cable into the dash!