How much dinitrol for inside the chassis & bulkhead?

I have had a google but cant find a definitive answer.

I was wondering how much dinitrol cavity wax to do the inside of my chassis and bulkhead on my 90.

I have a compressor and schutz gun and lance all ready to go and have been looking at this

00001 DINITROL CLASSIC 3125 RUST PROOFING CAVITY WAX - Rustbuster

Will 5 litres be enough?

I was thinking 4 litres in the chassis and 1 in the bulkhead

Ed

I used around three and a half litres in my 110 chassis,stopped then as it was saturated and dripping out all over the shop.

Cool should have plenty for the bulkhead and I might aswell do the doors to

6 sounds about right... i'll take some pics when i do it next weekend lol

Can you take some pic's of the rust too?

I got the Large car kit from Rejel, then added a couple more! But I wanted to go OTT.

Also got the Dinitrol gun, which while fooking expensive is really really good.

Used about 6 litres on my 90, but then I went mad with the old schutz gun

If that's the version I used inside it is fairly thin and runny so it used less than I expected. Just keep spraying it in until it starts running out in other places. Keep moving the lance back and forth through the chassis holes to make sure it's spread around all over the place inside. Rather than put gallons in just for it to run out on the ground I ended up keeping a bit back so as to give it another spray in a year or two's time. Don't forget the little holes in the bottoms of the doors too.

Did any of you heat it up to make it even thinner?

yup, popped it in the over for 5mins at 100c.

Perfect.

But remove the plastic caps and seals first and stand it upright - bit of a bugger if you don't.

Cheers chaps.

I have modified my Schutz gun so it has a 4 foo long rubber pick up pipe I can just dip in the container, my plan was to heat the can up with boiling water and leave it standing in that to keep it runny

Thanks for all this information, Gents. As I've just got my 90, I'm hoping to rust treat it and nip (slow down) any further rot in the bud. At the moment I'm thinking the large Dinitrol kit from Rejel. I'm also thinking of POR15 Stop Rust Kit in Black (Small size) for touching up any part that's already got rust on it - that I can access of course. Inside the rails, I'll have to use the Dinitrol ML.

Does this sound correct to you?

benpalmer, you mentioned a Dinitrol gun..? Which one is that?

Seems a bit wasteful for me to buy a sprayer for a once-in-a-few-years job. We should have a sprayer-sharing-club.

benpalmer said:

yup, popped it in the over for 5mins at 100c.

Perfect.

But remove the plastic caps and seals first and stand it upright - bit of a bugger if you don't.

Click to expand...

I can only imagine. Destroyed a washing machine with waxoyl soaked overalls 3 years back - would have been doubly popular if I'd destroyed the oven as well!

I used 10L, but I did go mad everywhere - it left its mark every time I stopped for 12mths!!!