With the Britpart ones I think it is just a colour difference tbh someone else may say otherwise if I'm wrong but if your not worried about losing a small amount of comfort against the polybush comfort ones then I wouldn't spend the extra as I have used them in the past on several land rovers and never had a problemThanks, do you know what the different colours are? The description of the black and the yellow britpart ones are the sameis it just colour preference?
I can see the polybush brand ones have different colours for different characteristics
How easy or hard is it to work on these things
- Thread starter Stu63
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
She's just brought me more so who's loosing the plot.She's just brought it to me.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Mine were yellow.Thanks, do you know what the different colours are? The description of the black and the yellow britpart ones are the same
I can see the polybush brand ones have different colours for different characteristics
Mine are orange when they ain't covered in oil, they spend most of the time being blackMine were yellow.
brianp38dse
Well-Known Member
- Posts
- 19,585
- Location
- heathrow
I have a set of flowflex radius arm bushes that i never used if any one is interested.
RRDT they are orange
RRDT they are orange
- Posts
- 2,092
- Location
- Mull of Kintyre
I fitted the blue "Comfort" ones. Biggest mistake I ever made. The car was undriveable if you hit a pothole over 50mph
Gord Wedman
Well-Known Member
- Posts
- 612
- Location
- Chilliwack, British Columbia
I have read that black is the soft version and close to original. People have said the other bushes are too hard. No personal experience.
As for Working on the P38, the engine, drive train, brakes, etc. are pretty straight forward although coil packs are hard to change. Worst jobs are blend motors and heater O rings.
As for Working on the P38, the engine, drive train, brakes, etc. are pretty straight forward although coil packs are hard to change. Worst jobs are blend motors and heater O rings.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
- Posts
- 2,092
- Location
- Mull of Kintyre
They certainly needed some lube cos a tight fit and very sensitive to bumps
Marshall8hp
Well-Known Member
- Posts
- 297
- Location
- Sydney
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
RangeRoller dt
Well-Sprung Member
- Posts
- 14,263
- Location
- Trapped inside my head @ LZ asylum
They don’t say a pain ; they say a nightmare
It’s all relative.
That’s the problem.
It’s all relative.
That’s the problem.
Yes if you are mechanically minded you shouldn't have any issues, it is just the electrical side that can be finicky and confusing to sort out at times
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
That just about sums it up, if I at 70 and still recovering from four strokes and a heart problem can manage there's hope for everyone.
- Posts
- 4,456
- Location
- Rotherham
Totally the way forward and not a bad job to doI hope you put the Audi LHD matrix in while you had the dash out so you never have to do the o rings again.
- Posts
- 4,456
- Location
- Rotherham
Do what I have. A very good excellent neighbour who loves getting his hands dirty and knows what he is doing. My P38 has put me in hospital twice when doing bigger jobs, mind you I do have heart and other problems
BUT they are an easy car to work on. Go for it
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
I wish my neighbour liked getting her hands dirty, mind you it would probably kill me.Do what I have. A very good excellent neighbour who loves getting his hands dirty and knows what he is doing. My P38 has put me in hospital twice when doing bigger jobs, mind you I do have heart and other problems
BUT they are an easy car to work on. Go for it
- Posts
- 4,456
- Location
- Rotherham
If she's like one of the neighbours I have. Ooooooh what a way to goI wish my neighbour liked getting her hands dirty, mind you it would probably kill me.
Similar threads
