Hinge Pin Replacement 3 Door

Afternoon all,
Questions, is it possible to change the front door hinge pins in place and if so how.
Cant seem to find much on google.
Its on a 3 door drivers side.

You have to change the whole hinge as the pin isn't available .

thanks for the answer, will see if I can get them.

As anyone actually change the hinges on a 3 door front drivers side ?
any information would be appreciated

Remove footwell side trim to reveal plug couplers, disconnect and feed through hole in bodywork to allow door removal.
Tap out taper pin in door restraint strap.
Open door fully and remove 2 Circlip from hinge pins.
Lift off door, it is heavy!
Unbolt and replace hinges.
Replace is reverse of disassembly, as Haynes manual so often quotes!!!

Thanks for you respond
We shall give it a go

I have not seen any circlips on the hinge pin and the one I tried to tackle is a solid pin

teddywood1 said:

I have not seen any circlips on the hinge pin and the one I tried to tackle is a solid pin

Click to expand...

The clips are there.
See here.

Going to do the job tomorrow
The hinges are BIGGER than I thought

Make sure there is room to open the door to its fullest position as you can only lift it off when open due to the hinge design.
Good design to stop the doors falling off !
Two people to lift or sommat will get scratched.

My strapping 17y old son as been told his helping by his mam so we should be good !
My only option is on the drive unfortunately but it’s very wide
Fingers crossed for the weather

How dit go??

andyfreelandy said:

How dit go??

Click to expand...

Just got back in now !
Longer than expected but I did change the window and window regulator bloody eBay regulator needed bolts So had to scavenge them up and the wiring in the door what a nightmare
But one it’s done
Thanks