Hi!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
NIgor

NIgor

Member
Posts
49
Location
Scandinavia
I'm Eero from finland and i just bought my first land rover. It's freelander 1 -99 with 1.8 petrol engine.
I like british machines and i'm also working now with my BSA project. It's Bsa B40 -62.
I also have Royal enfield bullet 500 -01. And month ago i sold my jaguar xjr -96.

My freelander is little project so I hope you can give some technical advice :)
 
hi my friend i am also a new with 2002 freelander 1,8 with head gasket changed and the car looks fine.I am a japan fan and the car is for my wife and all the family members.Its nice to collect opinions and solve problems ofour cars.I also build a nissan 200sx with rb26dett engine full rebuilt topower 1000hp from.tomei.But i like the freedo 4door for the room inside and driving sense
 
MANOSLADOP said:
hi my friend i am also a new with 2002 freelander 1,8 with head gasket changed and the car looks fine.I am a japan fan and the car is for my wife and all the family members.Its nice to collect opinions and solve problems ofour cars.I also build a nissan 200sx with rb26dett engine full rebuilt topower 1000hp from.tomei.But i like the freedo 4door for the room inside and driving sense
Click to expand...

Nice :) I also have Volvo 740 -88 fully rebuild 2.3litre turbo engine and usa style headlamps and with some other tunning. But there is just some 250hp :D
By the way is gasket change big job? My freelander engine is in good condition but gasket leak is quite common fault... just waiting for it... :p
 
NIgor said:
Nice :) I also have Volvo 740 -88 fully rebuild 2.3litre turbo engine and usa style headlamps and with some other tunning. But there is just some 250hp :D
By the way is gasket change big job? My freelander engine is in good condition but gasket leak is quite common fault... just waiting for it... :p
Click to expand...
If you change it now you will be able to avoid more work.Its easy to change it by locking the top dead crank and lock the camshafts with the small tool.I put first a water gauge autometer to the top radiator colar so i look the water temp.You should do that and will not miss the temp above 85
 
You must log in or register to reply here.

Similar threads

JokerUK
RRS 4.2 S/C won't idle
Replies
7
Views
569
Rubberknees
Rubberknees
Atlast47
Hello Earthlings!
Replies
5
Views
487
Hippo
Hippo
Stance
New member - Freelander 1 TD4
Replies
4
Views
369
Stance
Stance
Cobby44
Freelander 2 TD4 XS Commandshift Auto
Replies
4
Views
2K
Nodge68
Nodge68
malcolm_durant
Freelander 1 speaker woes
Replies
17
Views
3K
Lifeboatboy
Lifeboatboy
Back
Top