LandyPanda
New Member
- Posts
- 1
- Location
- Soberton
I have a Defender 90 300 TDI, I have bought some RX8 seats to replace the originals. Seen a bit online but wondered if anyone here has put them in?
Hi, thanks for having me.
- Thread starter LandyPanda
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
v8geoff
Well-Known Member
- Posts
- 3,327
- Location
- chippenham,wiltshire
Hi welcome
Matt11
Member
- Posts
- 38
- Location
- West Yorkshire
Hi, welcome.
I replaced my seats with the RX8 seats. I grinded off all the brackets and then bolted the RX8 runners to lengths of 25mm steel box section which were then bolted to the original fixings. They are so much better than the originals. Only problem i have is getting to the battery as it means taking the seat out instead of just lifting the bottom section off.
I didn't take any photos etc but have a look here:
https://www.landyzone.co.uk/land-rover/mazda-rx8-seats-fitted.277083/
https://www.landyzone.co.uk/land-rover/mazda-rx8-seats.235707/
I replaced my seats with the RX8 seats. I grinded off all the brackets and then bolted the RX8 runners to lengths of 25mm steel box section which were then bolted to the original fixings. They are so much better than the originals. Only problem i have is getting to the battery as it means taking the seat out instead of just lifting the bottom section off.
I didn't take any photos etc but have a look here:
https://www.landyzone.co.uk/land-rover/mazda-rx8-seats-fitted.277083/
https://www.landyzone.co.uk/land-rover/mazda-rx8-seats.235707/
Similar threads
