Hi guys

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

MightyGreen

Member
Posts
10
Location
UK
Hi there,

Long time lurker 1st time poster.

I have had my series for around 4 years now, 2 on the road 2 off, It is a 1979 109 2.25 petrol. after it running rough for a few months i decided to take the engine apart revealing 5 cracked valves, after having the head reconned and skimmed to give 9:1 c/r it is now running but not driving due to clutch issues. I am looking forward to having it on the road this year and making some improvement based on advice on this forum.

Thanks for reading and i look forward to reading on posting around here.

landy.jpg
head.jpg
 
Welcome.

Engine work looks good.
Bodywork is always an optional extra, beside more blingy more likely get nicked it don’t have to look good to go good:)

J
 
I have a chihuahua for security so no worries on that front. :) Hears a few pics of the head before recon and 2 of an old project.
 

Attachments

  • valve 1.jpg
    valve 1.jpg
    103.1 KB · Views: 85
  • valve 2.jpg
    valve 2.jpg
    85.9 KB · Views: 74
  • head 2.jpg
    head 2.jpg
    68.3 KB · Views: 78
  • Old disco.jpg
    Old disco.jpg
    101.1 KB · Views: 86
  • trayback.jpg
    trayback.jpg
    101.6 KB · Views: 86
The 109 in the series 2 and 3 is my favourite..

Very smart, and good job on the engine..

The 2 1/4 is a nice sweet motor when tuned and built right..

Get on over to the Project section and post ya adventures ;)
 
Back
Top