Defenderdog1
Active Member
- Posts
- 404
- Location
- Hemel Hempstead
Hello stu, I'm looking into a roll cage at the moment are they reasonable on price and good quality?
Hertfordshire Lanes?????
- Thread starter 99claydond
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hello stu, I'm looking into a roll cage at the moment are they reasonable on price and good quality?
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Built with 2.6mm cds going to be about 900 for the kit but will know tomorrow. Djdommyp knows someone
Defenderdog1
Active Member
- Posts
- 404
- Location
- Hemel Hempstead
Are you doing all the welding yourself? Will get in contact with djdommyp
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Yep that's a kit cut bent and notched
- Posts
- 83,230
- Location
- Embasinga stocæ
Anyone close to Hatfield got a V8 viscous fan a guy could borrow or buy? - guy thinks his is fecked.
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
I may have one in the shed but nowhere near Hatfield at the moment??
I Deffo have a diesel one tho which would get him outter the crap
J
I Deffo have a diesel one tho which would get him outter the crap
J
- Posts
- 83,230
- Location
- Embasinga stocæ
Are they the same?
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Same thread on the old water pumps old v belt not sure on later v8's tho
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Mhm got a link to thread asking for help??
Can't find one
Can't find one
Farrar
Well-Known Member
- Posts
- 1,007
- Location
- Bedfordshire
Whose going to whaddon punch event this weekend.
Defenderdog1
Active Member
- Posts
- 404
- Location
- Hemel Hempstead
The other half is overdue so can't go to far, but on a good note all the bumps might bring on labour.
Titch1987
Active Member
- Posts
- 123
I will be there
Leebastard
Active Member
- Posts
- 504
- Location
- Luton
Titch1987
Active Member
- Posts
- 123
When are you going to come out lee?
Leebastard
Active Member
- Posts
- 504
- Location
- Luton
When I'm home! I haven't had a minute to scratch my arse in a few months now. Hopefully it should quieten down a bit at the end of October. Hopefully haha
Titch1987
Active Member
- Posts
- 123
I know that feeling starting to slow down for me so I can get out again.
Hi guys. Had a problem with the 110 today. Waterpump bearings collapsed dropping the belt and chewing up the housing a bit. Question is do I need to replace the housing with this groove worn in it. New one is £200 plus or 30-50 on eBay. Would be nice not to have to, but I can see that it might reduce the efficiency of the pump.
Thanks in advance.
Thanks in advance.
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Hi guys. Had a problem with the 110 today. Waterpump bearings collapsed dropping the belt and chewing up the housing a bit. Question is do I need to replace the housing with this groove worn in it. New one is £200 plus or 30-50 on eBay. Would be nice not to have to, but I can see that it might reduce the efficiency of the pump.
Thanks in advance.
I would say yes. Might give you problems if you don't
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
For now polish it's smooth and fit a new water pump
