My Disco Infernal
New Member
- Posts
- 4
- Location
- California
Hello fellow subs, I've gained so much knowledge from this forum, and others, but I never thought I would be here asking for help, but here I am.
For starters, my 04 D2 started missing, my scanner said misfire at #6 cyl, it turned out to be a bad plug wire, so I went ahead and changed the coils, plug wires, and injectors, since I it was all taken apart. Then it would crank, but no start. The scanner read "open relay", so I changed the relay, still no start. At the Schrader valve, the fuel pressure was really low, I changed the fuel pump $, no start. Then the dreadful CPS, no start. The fuel pressure was much stronger, but nothing to brag about. I do have a spark, I reset the Inertia switch and it seemed to want to start, but nothing!....Any help would be appreciated.
For starters, my 04 D2 started missing, my scanner said misfire at #6 cyl, it turned out to be a bad plug wire, so I went ahead and changed the coils, plug wires, and injectors, since I it was all taken apart. Then it would crank, but no start. The scanner read "open relay", so I changed the relay, still no start. At the Schrader valve, the fuel pressure was really low, I changed the fuel pump $, no start. Then the dreadful CPS, no start. The fuel pressure was much stronger, but nothing to brag about. I do have a spark, I reset the Inertia switch and it seemed to want to start, but nothing!....Any help would be appreciated.
