Fl2 sd4 non start

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
W

washie

New Member
Posts
8
Hi guys just had my fl2 2.2 diesel oveehauled, car cranks but no start. ECU was replaced and cloned HP pump was replaced.....fuel on the common rail has weak pressure. Car start with quick start only for a moment then shuts down...can you please advise.
 
Why was the ECM replaced? These things never fail in the life of the vehicle, unless damaged by faulty wiring.
What was done for the overhaul? Was everything put back together correctly, including the hidden plugs on the HP pump.
 
Nodge68 said:
Why was the ECM replaced? These things never fail in the life of the vehicle, unless damaged by faulty wiring.
What was done for the overhaul? Was everything put back together correctly, including the hidden plugs on the HP pump.
Click to expand...
The ECM was faulty as per diagnosis, the new one was cloned/programmed and yes the plug by the solonoid was properly put and tested for current and it did pass still no start
 
washie said:
The ECM was faulty as per diagnosis, the new one was cloned/programmed and yes the plug by the solonoid was properly put and tested for current and it did pass still no start
Click to expand...
What diagnosis? who did the diagnosis and how, what fuel filter do you have fitted.
 
Arctic2 said:
What diagnosis? who did the diagnosis and how, what fuel filter do you have fitted.
Click to expand...
I'd like to know this too, as they're basically bomb proof.

washie said:
The ECM was faulty as per diagnosis, the new one was cloned/programmed and yes the plug by the solonoid was properly put and tested for current and it did pass still no start
Click to expand...
I wasn't aware they could be cloned. As far as I'm aware SDD is the only way to configure a replacement ECM to the vehicle.
Having an incorrectly coded ECM will prevent it starting.
 
Nodge68 said:
I'd like to know this too, as they're basically bomb proof.


I wasn't aware they could be cloned. As far as I'm aware SDD is the only way to configure a replacement ECM to the vehicle.
Having an incorrectly coded ECM will prevent it starting.
Click to expand...
I might have used wrong terminology there, but yes it was configured properly by a reputable company.
 
washie said:
I might have used wrong terminology there, but yes it was configured properly by a reputable company.
Click to expand...
But has it started since it was done? And why was it changed in the first place? Like I said, they're basically indestructible.
 
You must log in or register to reply here.

Similar threads

M
FL2 NO START / NO DASH
2
Replies
29
Views
852
Matt BB
M
D
FL1 TD4 warm start issues
Replies
3
Views
1K
Arctic2
Arctic2
A
FL2 faulty throttle body?
Replies
4
Views
1K
Arctic2
Arctic2
R
Freelander TD4 starting problems
Replies
8
Views
2K
Nodge68
Nodge68
Deni75
Freelander 2 (LR2) Freelander 2 it doesn't start
Replies
6
Views
1K
Jocelyn
J
Back
Top