P38A Help
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
gold rover
Well-Known Member
- Posts
- 10,292
- Location
- dùthaich Dhè fèin
Henry_b
Think outside, no box required.
- Posts
- 15,509
- Location
- somewhere else
A few blobs of RTV on the rocker cover and gasket should stop if sagging off the cover while refitting..
Henry_b
Think outside, no box required.
- Posts
- 15,509
- Location
- somewhere else
Some also use a heavy sticky grease, silicon grease works well as it's got a sticky nature too it..
- Posts
- 19,312
- Location
- Buckinghamshire, UK. ('95 DT)
Your previous answer of RTV is the way, although I managed it on about the third attempt without.
I did warn you, Dopey! It is a total PITA! Sticking that half-moon shape in the back there under the bulkhead with almost no room to get even a finger in was the act of a sadist.
brianp38dse
Well-Known Member
- Posts
- 20,097
- Location
- heathrow
I popped round to give him a hand when I saw the post for help and agree what a pain in the back side, and looking at it thought about machining up a alloy half moon shape to put in with rtv and cutting that bit off the gasket to make it easier.
may look in to it for when mine needs doing.
- Posts
- 58,170
- Location
- Preston Lancs.
Obviously you lot have never heard of Evostick. Cam cover bolts 11 lb ft. 15 froggy things.
Last edited:
RangeRoller dt
Well-Sprung Member
- Posts
- 14,413
- Location
- Trapped inside my head @ LZ asylum
You kept it quiet that Brian came to rescue, now we know where you got them pegs
brianp38dse
Well-Known Member
- Posts
- 20,097
- Location
- heathrow
Nah I just watched and gave hindranceYou kept it quiet that Brian came to rescue, now we know where you got them pegs
I mean support and a little help, the pegs were all Dopey`s doing
RangeRoller dt
Well-Sprung Member
- Posts
- 14,413
- Location
- Trapped inside my head @ LZ asylum
Pointing and laughing in true landyzone fashion. The trick is to be super silent and grin
FairPlay to you fella, He did fine, all was needed was a little support - p38's freik you out like that
If you ate all his Jaffa cakes you can make it up to him by doing his steps...
FairPlay to you fella, He did fine, all was needed was a little support - p38's freik you out like that
If you ate all his Jaffa cakes you can make it up to him by doing his steps...
brianp38dse
Well-Known Member
- Posts
- 20,097
- Location
- heathrow
Don't like Jaffa cakes but I will still give him a hand with the side steps if needed
RangeRoller dt
Well-Sprung Member
- Posts
- 14,413
- Location
- Trapped inside my head @ LZ asylum
Ah, custard cream man then...
brianp38dse
Well-Known Member
- Posts
- 20,097
- Location
- heathrow
Ahh now we are talking custard creams mmmmm but I can only eat one at a time
packet that is
RangeRoller dt
Well-Sprung Member
- Posts
- 14,413
- Location
- Trapped inside my head @ LZ asylum
We will have 1/4million members, with freelander 2's by then. Can you BBQ a hobnob?
I've got plenty of tinkering for 1/4 million, or one Wammers whichever you got
I've got plenty of tinkering for 1/4 million, or one Wammers whichever you got
