Help - welding needed - Essex

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Black TD5 ES

New Member
Posts
18
Location
Harwich, Essex
I have a black Discovery TD5 MOT failure in need of urgent help - welding needed on rear chassis - MOT guy basically has butchered it with a hammer

and a couple of patches on the front of the chassis.

Can anyone help me in Essex or Suffolk?

thanks

Nick
 
I don't know if Pressbrake could help (south Essex)
Matthew2Riches also does welding (Suffolk).
Or maybe buy a mig and get practicing on some scrap.

Good luck with it.
 
Who has touched it with a hammer? Wasn't the greatest idea by the sounds of it!

exactly - and im told MOT guys are not supposed to hit it with hammers.......i have the car looked at regularly by a land rover specialist who undersealed the lot of it and it was not in a bad state before

you do welding Matthew? Discodad mentioned you do

Ive found out the chassis arm is £70, then just a case of welding it on
 
TBH if its thin enough to break with a hammer then it should be done. You could be pulling 3.5T on a tow bar attached to it.
 
MoT tester will have a toffee hammer. You say it is looked at regularly? Surely they wouldn't have undersealed a rotten chassis leg though? Rot doesn't happen overnight to the point that you can put a hammer through it :D

Yes I do welding. Maybe PM me if you like. i have always have a look for you.
 
i think were missing the point of LZir. :confused:

Its not an i need help with finding a babysitter type service, its for if your stuck or broken down in an emergency situation.
 
Back
Top