paul the hunter
New Member
- Posts
- 4
1998 2.5 300 tdi auto the hi lo shift stick wont move is this a common fault can i fix it help please im not haveing much luck this is landrover number 3 im not sure if its a disco 1 or 2
help the hi lo shift stick stuck
- Thread starter paul the hunter
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Huddy44
Active Member
- Posts
- 108
- Location
- Sherburn In Elmet, Leeds
U might have to strip the console out of the middle. Disconnect the linkage and removes the whole lever assembly (only a few bolts) and get it int vice, loads of WD40 and keep working it. I've had them so siezed in the past that I've soaked them overnight in diesel.
paul the hunter
New Member
- Posts
- 4
ok thank you and iv now done it all working .
John FHA
Active Member
- Posts
- 300
- Location
- Cleveleys, Blackpool
Check this out. If doesnt work. type in youtube diflock last stand. lol Make sure ya kids dont hear it.
Diff Locks Last Stand (Rated PG) - YouTube
Diff Locks Last Stand (Rated PG) - YouTube
shocker
Well-Known Member
- Posts
- 2,038
- Location
- BODMIN MOOR,KERNOW
If its a 300 its a D1 . And yes , its a VERY common problem especially on vehicles that have only had light use .
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
If it's a TDi engine it's a D1. When you say it won't move, do you mean it won't move between low and high, or diff lock and unlock?
You do know that your need the autobox to be in 'N' to move between high & low?
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
