help pls just been given this

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

apples24

Member
Posts
50
hiya chaps as you can tell im not a regular lol

anyways im in the motor trade and also run a recovery truck, from time to time i get given cars to remove scrap etc at end day it all goes in the pot towards the bills ;)

i was given this old heap to scrap today

its a petrol though, the mad thing is its quite a straight old thing, doesnt even look horrid underneith from a quick glance, yes i know its covered in green slime, im picking it up tomorrow i think ill throw it in the driveway for a few days to decide what to do with it, i may even trow a sponge over it lol

i however know nothing, what can you guys tell me? all i know if i take it to scrap merchants ill prob only get £70 for it, dont know what they weigh?

just done a hpi its all clear says its a 88" ????????? chassis number is 90105080A
lee

IMG_0103.jpg

IMG_0104.jpg

IMG_0105.jpg
 
Last edited:
wash it, put it on ebay and you'll get 300 for it

break it and you'll get 500

tax, it mot it and you'll get a lifetime of fun out of it
 
hmmn not bad then on the hpi it showed year of manu 1972 registered in jan 73 is it exempt? the dvla site didnt show to many details
 
hmmn not bad then on the hpi it showed year of manu 1972 registered in jan 73 is it exempt? the dvla site didnt show to many details

72 is tax free cut off ? - check the chassis, specially the front dumb irons - you might find fist sized holes underneath
 
looking at the pics every thing seems to be very straight with no big issues with the panels, give it a bath and clean it up , as for underneath the vehicle you need to do a landy limbo and have a good look before deciding what road you are going down, welding or replacing chassis is best done with the body off and that isnt a bigger job as it sounds,
 
Depends on whether you have the time and the funds........... to work on it for the next 10 years
 
im in southampton

what ill d is get it moro clean it off and climb underneith for a good look abd report back


i tried to start it but the starter spins but doesnt engage, i did try climb underneith to give it a wack but its right in a awkward position, are they easy to remove? i presume they are these things are so basic
 
hospital pmsl, i have got a two post ramp so can get under it if have to, dont fancy pushing the fookin thing on there tho lol
 
prob the best way to go thanks guys, might climb under it to see starter bolts but if its as you say might not bother lol, spose i could try bump starting it
 
Dont bump start it, theres a twokker device fitted and it alerts some 'men' in freelanders in brighton who come and look up yer bum and do your hair in a 1975 kevin keegan style perm Sell it immediatly to me.
 
Back
Top