help needed series 3 2.25 coldstart light issue

james sayers · Jul 16, 2016

i have just brought a series 3 2.25 petrol

after fixing the starter motor and putting fresh fuel in she fired up and ran very poorly black smoke out exhaust stalling missfiring

however the coldstart light is staying on and i cannot see a choke lever i have removed the air pipe and the choke is off any ideas whats going on??

blue beasty · Jul 16, 2016

The cold start light is operated by a switch that should clip to the choke cable just on the engine bay side of the bulkhead. If it's not clipped on the switches default setting is on.

I doubt it's anything to do with your smoke issue.

james sayers · Jul 16, 2016

blue beasty said:
The cold start light is operated by a switch that should clip to the choke cable just on the engine bay side of the bulkhead. If it's not clipped on the switches default setting is on.

I doubt it's anything to do with your smoke issue.

will take the dash apart and have a look tomorrow cheers mate

blue beasty · Jul 16, 2016

james sayers said:
will take the dash apart and have a look tomorrow cheers mate

It should be under the bonnet. Looks like

doodle bug · Jul 17, 2016

Black smoke if the choke is off usually means its time for a replacement carb !

.........i had the same problem !! fitted new carb and its running perfect

james sayers · Jul 17, 2016

have taken off the webber carb and some **** has tried to drill the jets out have orderd a replacement will see what thats like when it comes

help needed series 3 2.25 coldstart light issue

james sayers

New Member

Attachments

blue beasty

Leaks an prone to bits dropping off

james sayers

New Member

blue beasty

Leaks an prone to bits dropping off

doodle bug

Well-Known Member

james sayers

New Member

Similar threads