Help identifying loose pipe or clip?

Returning to my 04 Disco TD5 Auto today I noticed what appear to be a loose
pipe hanging down around the front axle. A closer look revealed that could
perhaps be a breather, it is about 3ft long and begins at the transfer box
and leads forward, the end is hooked and is currently just dangling and
resting on the propshaft to the front axle.

Can anyone tell me what it is and where its should be!
--
Darren Griffin
Pocket GPS World - http://www.pocketgpsworld.com
The Premier GPS Resource for News, Reviews and Forums

Mr.Nice. wrote:
> transfer box breather pipe,
> the loose end should be attached to the bulkhead in the engine bay.
>
>
> Regards.
> Mark.(AKA, Mr.Nice.)

Thanks Mark, I'll see if I can re-attach it!

--
Darren Griffin
Pocket GPS World - http://www.pocketgpsworld.com
The Premier GPS Resource for News, Reviews and Forums

Mr.Nice. wrote:
> The end of the pipe usually has a 180 degree turn in it and it's
> clipped to the bulkhead just below this.
>
> Just reminded me all mine need replacing. they were all knackered when
> I got my current LR and that was in january, I've run-out of those
> tuits, the round ones.
>
>
> Regards.
> Mark.(AKA, Mr.Nice.)

After scrabbling about underneath I found the plastic clip to which another
breather was also attached which had a vacant space! All sorted now, thanks


--
Darren Griffin
Pocket GPS World - http://www.pocketgpsworld.com
The Premier GPS Resource for News, Reviews and Forums