Series 3 Heater Intake Wing Trim

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

beachy723

New Member
Posts
6
Location
Surrey
I'm looking for a stock part that i can use to fill this hole on my wing(approx about 130mm):
upload_2020-8-12_20-8-2.png

i was wandering if anyone knows the dimensions/outer diameter of the heater trim, so I could use that as a fix.
upload_2020-8-12_20-4-59.png
 
I'm looking for a stock part that i can use to fill this hole on my wing(approx about 130mm):
View attachment 217034

i was wandering if anyone knows the dimensions/outer diameter of the heater trim, so I could use that as a fix.
View attachment 217033
I will measure mine later today when I am out. I cut the heater hole in my wing so know I have the correct sized hole saw to reference as well.
 
I'm looking for a stock part that i can use to fill this hole on my wing(approx about 130mm):
View attachment 217034

i was wandering if anyone knows the dimensions/outer diameter of the heater trim, so I could use that as a fix.
View attachment 217033
I will measure mine later today when I am out. I cut the heater hole in my wing so know I have the correct sized hole saw to reference as well.
 
I used a 127mm hole saw to cut the heating intake hole in my wing which fits the original intake cover.
 
Back
Top