Heater controls

Uncle Fes · Jan 13, 2011

I've finally got the heater working. The control cables were seized, so I've just cut them off.

On the heater box there's a thing on low down on the side that opens and closes a door from the heater to the duct - all air on and off.

On the top there's another 'thing' that moves a flap inside the box and gives hot and cold.

My question is - how do you direct the air either up or down? Mine is giving great flow to the screen, either hot or cold, but nothing at all to the footwells. Neither of the controls in the heater box seem able to influence this.

Is there a flap inside the car somewhere?

instantsquid · Jan 13, 2011

Uncle Fes · Jan 13, 2011

Thanks....

Any chance you could give me a clue as to where?

instantsquid · Jan 13, 2011

The lever on the right hand side of the clocks operates a rod with the flaps on, inside the dash.

Uncle Fes · Jan 13, 2011

Aha. Mines a left hand drive. I have a lever to the right of the speedo that does the fan and something else presumably, as it's ruddy stiff.

There are two levers on the left that are presumably connected to the cables on the box, but the decals are long since gone so i can only guess at their function...

Whereabouts is the flap? I might have to move it without the cable, as doubtless it's full of twenty years of sand, like everything else.

bustersbus · Jan 13, 2011

The cable that works the flap for demist or heat at yer feet goes into the lower dash. Ye might be able to see it in these photies (right hand side )....

not the best, but gives ye an idea

Shifty1962 · Jan 13, 2011

The arm on top of the heater box controls the hot/cold setting.
The arm on the side of the heater box is the fan speed setting.
As Buster says the demist/footwell lever controls a flap inside the dash.

Uncle Fes · Jan 13, 2011

Thanks Buster. I get it now. Looks like the two footwell outlets have flaps that just close them off.

I'll try and free the cable off, but imagine I'll have to try and move them by hand - or screwdriver!

bustersbus · Jan 13, 2011

Uncle Fes said:
Thanks Buster. I get it now. Looks like the two footwell outlets have flaps that just close them off.

I'll try and free the cable off, but imagine I'll have to try and move them by hand - or screwdriver!

Try dribbling some oil or summit down the cable to see if that works.. or take the bottom vent covers off and try pushing the flaps to see if that's the problem

Uncle Fes · Jan 13, 2011

Thanks, I'll try that. Pushing the flaps open sounds more my style!

Heater controls

Uncle Fes

Active Member

instantsquid

New Member

Uncle Fes

Active Member

instantsquid

New Member

Uncle Fes

Active Member

bustersbus

Well-Known Member

Shifty1962

Well-Known Member

Uncle Fes

Active Member

bustersbus

Well-Known Member

Uncle Fes

Active Member

Similar threads