- Posts
- 13,760
- Location
- Sud ouest France !
where are they wired into then? Will have to check the rave accessory's list.
heated washer jets! both?
- Thread starter philip pickard
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
There is no provision for heated wash jets on the P38.
- Posts
- 13,760
- Location
- Sud ouest France !
ah well, that's blown it!!
saxavordian
Well-Known Member
- Posts
- 10,131
Pending on age the waterjet pumps could have simply failed. On heating the W/S liquid can insulation help or alternative is for heating from the start by adapting a low level heating element to the container. The problem I found was the tubes freeze first then straining the W/S pumps. So either insulate the tubes and the container is the only option.
- Posts
- 58,170
- Location
- Preston Lancs.
If when pipe is disconnected washer liquid is being pumped out of it when washer is switched on. The jets are blocked in some way. I would have thought that to be obvious. If they cannot be cleared fitting new is the only option.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,976
- Location
- Buckinghamshire, UK. ('95 DT)
ah well, that's blown it!!
Why not tie them into the heated seats?
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
Why would you want hot water squirting all over your a*se ?
saxavordian
Well-Known Member
- Posts
- 10,131
philip pickard
Active Member
- Posts
- 239
- Location
- doncaster
o
Last edited:
- Posts
- 13,760
- Location
- Sud ouest France !
philip pickard
Active Member
- Posts
- 239
- Location
- doncaster
t
Last edited:
- Posts
- 58,170
- Location
- Preston Lancs.
