DERVbytheway
New Member
- Posts
- 6
- Location
- Lanark
Helo people.any ideas how to freshen up the h,lamp lenses.there fogging at the top.it looks like it is in the inside.any help? Thanks
Headlamp frosting
- Thread starter DERVbytheway
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Flossie
Well-Known Member
- Posts
- 10,648
- Location
- Shropshire
Welcome
DERVbytheway
New Member
- Posts
- 6
- Location
- Lanark
Yeh its clear updated plastic lens.looks terrible
300bhp/ton
Well-Known Member
- Posts
- 4,733
- Location
- Near MK
Celica, Ferrari, F150.....????
DERVbytheway
New Member
- Posts
- 6
- Location
- Lanark
2006 freelander td4
300bhp/ton
Well-Known Member
- Posts
- 4,733
- Location
- Near MK
A wipe over with WD40 will make them look great again. But only lasts hours/a day. Handy for going for an MoT.
Other than that you will need to polish them up. Lots of ways. Check out you tube for ideas.
I’ve used an electric buffer/polisher and some cutting compound to good effect. Just be careful not to catch any painted parts of the body.
A toothbrush and over cleaner would work too or again some sort of cutting compound. Even mild wet n dry sand paper if you are careful and the lens is really bad. Although you’ll need to use something milder to finish it off.
Other than that you will need to polish them up. Lots of ways. Check out you tube for ideas.
I’ve used an electric buffer/polisher and some cutting compound to good effect. Just be careful not to catch any painted parts of the body.
A toothbrush and over cleaner would work too or again some sort of cutting compound. Even mild wet n dry sand paper if you are careful and the lens is really bad. Although you’ll need to use something milder to finish it off.
DERVbytheway
New Member
- Posts
- 6
- Location
- Lanark
Think i will try toothbrush first,cheers
Similar threads
