Disco 2 hawkeye

Can anyone tell me if hawkeye will re-program injectors or ecu after replacement the nice man from the AAs system detected no faults but landy only running on 4 cylinders ordered new injector loom from paddocks am i right in thinking if you remove plug and check resistance on each injector on ohm setting you should get equal reading high or low reading being faulty

yes hawkeye can programm injectors/ECU, resistance check on solenoids might not be relevant cos i can vary according to the plungher's position though i've never seen failed solenoid .... if you have hawkeye you can test each solenid after you replaced the loom as they should click on circuit test

Many thanks will check as you suggest will bite the bullet and buy hawkeye could i ask does it also troubleshoot/reset suspension and adjust ride height etc

yes it does suspension too provided it's at least v.6

many thanks

Be careful if you are buying off ebay a lot of them advertise stock but don't actually keep them in.
It took me 3 attempt to get mine as the manufacturer had an issue supplying them.
Message them fist to check for stock.

wish i had read your message before i bought one off ebay version 7.0 advertised as last one hope it arrives said by 7th or 8th will let you know