Have i Got A Leak?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

-Defender110-

Well-Known Member
Posts
1,054
Location
limerick, Ireland
Was having a look around the engine bay a few mins ago, saw this: (see pics) Is this a leak i should be worried about? seems to go most of the way around.. 140k td5
 

Attachments

  • DSC00062.jpg
    DSC00062.jpg
    237.2 KB · Views: 206
  • DSC00063.jpg
    DSC00063.jpg
    221.8 KB · Views: 177
Get a new camcover gasket and sort it out. They are not dear and mine does not have any leaks at all. Failing that clean it all up and use some silicone sealant. Its nowt to worry about unless you like having a messy engine. It will only get worse.
 
Get a new camcover gasket and sort it out. They are not dear and mine does not have any leaks at all. Failing that clean it all up and use some silicone sealant. Its nowt to worry about unless you like having a messy engine. It will only get worse.

don't mean to pull you up on this shifty, but silcon is next to useless with oil, there are many sealents available.
 
motaquipe hydroseal is specifically used to glue peugeot sumps by main dealers
 
Calortight works for me............... (need something that will not melt as well)

But does a leaking engine just help protect you from rust :)
 
don't mean to pull you up on this shifty, but silcon is next to useless with oil, there are many sealents available.
Not if you clean everything up properly then let the silicone cure for a few hours. I've always used it and never had any problems. Also it comes off nice and easy when you need it to. Its what Ashcrofts use when they rebuild gear/transfer boxes which is where I got the tip from.
 
Back
Top