handbrake drum adjustment on a TD5

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
My hanbrake needs adjustment, and from doing a search you can adjust it at the drum. I can see where the cable comes through the cabin to the underside from the lever with an adjuster there, following the cable to the drum. Now is it a case of pulling back the rubber sleeve around the cable where it goes into the drum, or is the adjuster somewhere else. The car is a 1999 Disco TD5. Thanks
 
My hanbrake needs adjustment, and from doing a search you can adjust it at the drum. I can see where the cable comes through the cabin to the underside from the lever with an adjuster there, following the cable to the drum. Now is it a case of pulling back the rubber sleeve around the cable where it goes into the drum, or is the adjuster somewhere else. The car is a 1999 Disco TD5. Thanks

there is an adjuster on the actual brake housing, 17mm spanner/socket, jack one wheel up, spin and adjust, dead easy
 
You will find this in the D2 workshop manual.

Tighten brake shoe adjusting bolt until brake drum is locked, then back off adjusting bolt 1.5 turns. Check that the brake drum is free to rotate. Recheck handbrake operation.If handbrake is not fully applied with 3 notches on the ratchet, the handbrake cable requires adjustment.
 
My hanbrake needs adjustment, and from doing a search you can adjust it at the drum. I can see where the cable comes through the cabin to the underside from the lever with an adjuster there, following the cable to the drum. Now is it a case of pulling back the rubber sleeve around the cable where it goes into the drum, or is the adjuster somewhere else. The car is a 1999 Disco TD5. Thanks

see attachment
 

Attachments

  • D2 handbrake adjust.JPG
    D2 handbrake adjust.JPG
    132.8 KB · Views: 9,926
Back
Top