Greetings from Pembrokeshire

I had a cracking day. I came second in class. Some of the sections were much the same for the road going vehicles as for the specialist trialers and my overall score was a lower than quite a few of them.
A shunt is applicable to leave sprung vehicles and coilers over 100 inch. It's basically means you can stop and reverse to line yourself up more suitably for the next gate or if you can't make a tight turn.
No MSA licence is required but being a club member you are bound by the MSA.

Well done...2nd in class is good going. Good turn out? Ive had to work all weekend (double time tho ha ha) or I woulda come to spectate.
yes makes sense now, the shunt, turning circle is pretty poor and is worse in 4wheel drive. I got to put mine in 4 wheel drive to get up the rear lane then back to 2 wheel drive to turn into garage...still have to do a ten point turn!!
My mot is out in about 3 weeks so Im trying my hardest to sort my brakes out, Im getting a load of foam when bleeding them. I hope to get a couple of weeks use before shes in for mot work. I got the rear crossmember to patch up and door tops to replace.Id like to do a half tidy job like so not gonna rush.

Welcome

Mainlander said:

Welcome

Click to expand...

Thankyou - good to hear from you

Andrew there is a CCV trial tomorrow (Sunday7th) at Glogue quarry near Crymych. Should be a good day out. I'm entering in the orange thing in my avatar, I believe V8Jon is also entering his orange series.
Google Pembrokeshire Mudslingers and there's more details on the home page.
Cheers
Al

Bit late but Welcome! I have a 1974 P6B and Defender combination as you'll see from my Sig. picture cheers Tam

PembsLandy said:

Andrew there is a CCV trial tomorrow (Sunday7th) at Glogue quarry near Crymych. Should be a good day out. I'm entering in the orange thing in my avatar, I believe V8Jon is also entering his orange series.
Google Pembrokeshire Mudslingers and there's more details on the home page.
Cheers
Al

Click to expand...

Gidday Al, Its Sunday lunchtime almost and Im just reading your message! Sorry man, I know Glogue quarry quite well done a few night events through parts of it. Best of luck its a crackin day for it... keep in touch, let me know how you get on, Andrew

og51lvy said:

Bit late but Welcome! I have a 1974 P6B and Defender combination as you'll see from my Sig. picture cheers Tam

Click to expand...

Hi Tam, this is interesting, mine is a 1973 p6b in the same colour! Its locked in a barn a few miles away, next time I go there I will take a pic and try and upload it. Im not too clever with gadgetry but I do have a new phone which Im getting to know! I hope to get her on the road this year, having done all the hard work and changing her to manual. I will keep you posted! regards Andrew

Andrewrp6 said:

Gidday Al, Its Sunday lunchtime almost and Im just reading your message! Sorry man, I know Glogue quarry quite well done a few night events through parts of it. Best of luck its a crackin day for it... keep in touch, let me know how you get on, Andrew

Click to expand...

Sorry late reply. Was a great day, but had to retire two sections from the end. We had a heavy landing and it ruptured the radiator !! Up until then my scores were pretty low too.

PembsLandy said:

Sorry late reply. Was a great day, but had to retire two sections from the end. We had a heavy landing and it ruptured the radiator !! Up until then my scores were pretty low too.

Click to expand...

Alright there matey, aint been on here for a while sorry. Had a bit of a change of plan, was hoping to sort a few bits out and mot but one thing lead to another. As they do!! So ive bitten the bullet and stripped her down to a rolling chassis. Do a tidy job. Moved the chassis up to dinas last night.
Anything coming up locally?

Andrewrp6 said:

Alright there matey, aint been on here for a while sorry. Had a bit of a change of plan, was hoping to sort a few bits out and mot but one thing lead to another. As they do!! So ive bitten the bullet and stripped her down to a rolling chassis. Do a tidy job. Moved the chassis up to dinas last night.
Anything coming up locally?

Click to expand...

There's a RTV and CCV trial on Sunday 26th May at Woodpark near New Moat. That should be a good one, not sure yet which class to enter? I'll have to pop along one day and see your project.

PembsLandy said:

There's a RTV and CCV trial on Sunday 26th May at Woodpark near New Moat. That should be a good one, not sure yet which class to enter? I'll have to pop along one day and see your project.

Click to expand...

Sounds good - that aint far...... Im working that day but depending what time it goes on til I could shoot up for a gander.
Yea your welcome to call over my shed in Dinas, Im usually there couple of time times a week for a few hours... just started work on a new rally car. Sometime next week maybe? let me know when ur about