Got to say it.....I'm a real fan of my K Series!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Vulcan426

New Member
Posts
84
Location
Essex
Having just returned from a few days away in the Hippo, I have to say that, based on my personal experience, I'm now a confirmed fan of my K series.

Over the last 5 days, we have covered 815 miles, to, from and around the Lake District and it hasn't missed a beat.

Admittedly, I did do a lot of preventative maintenance beforehand - oil and filter change, cambelt change, remote thermostat kit fitted, along with a cooling system flush and new radiator - I even changed the clutch hydraulics for good measure.

Throughout the trip, the car started on the button every time, ran sweetly and (more importantly for a K series) the temperature remained below the half way point on the guage and she didn't use a drop of coolant - well, maybe a drop - and I mean, juts a drop.

In fact, the only problem we encoutered was a strange rattling noise when driving over rough ground. At first, I was worried (it sounded like an expensive sort of rattle). But a few minutes underneath revealed that some **** had not fully fastened one of the under-tray bolts when he put it back in place on the Friday before we set out!!! Five minutes with a ratchet and it was sorted.

I know that these engines certainly have a bad reputaion. And, having read all of the nightmare scenarios that people report on here, I can understand why. But my personal opinion is that if you accept it's a fragile thing and treat it accordingly, there's no reason why you can't get good service out of a 1.8 K series.

Admittedly, it's a bit under-powered for the body but even with the wife, myself and a boot full of luggage, it took the (very steep) hills of the Lake District in it's stride. It was comfortable, quite economical and afforded a much better view around the lanes than the wife's Mini, which we took last year.

You may think me strange, but I'm a real fan of my Freelander and happy with the little K series.

Long may it continue.
 
Glad to hear it. More people should be appreciative of the K series. I personally think it's a very good engine.

If you're feeling it's a bit underpowered at times, you may want to fit a conical K&N in place of the airbox. Provides a bit more grunt and if you want more still, you can fit a 52mm throttle body.
 
Glad to hear it. More people should be appreciative of the K series. I personally think it's a very good engine.

If you're feeling it's a bit underpowered at times, you may want to fit a conical K&N in place of the airbox. Provides a bit more grunt and if you want more still, you can fit a 52mm throttle body.

Cheers for the replies guys.

Freebiker - you've got me really interested in the 52mm throttle body thing - is that an easy change?
 
Very easy to do, just unbolt the old one, bolt on the new and re-attach throttle cable and throttle position sensor wiring. Takes about 20 mins.

Also won't warp like the 48mm plastic throttle body.
 
Another K series fan here although my Freelander has a TD4:lol: I do also have both an 11 year old VVC engined MGF (115k) and a new TF, both with the 1.8 k series. The MGF has had HGF (surprise surprise!) but not until 98k but a fix with the MLS gasket sorted that out. The TF is supposed to be cured of the HG fault but time will tell, its not yet 2 years old and only covered 15k.
 
I had an Mg ZS 1.8, MGf 1.8, TF 1.8 and finally ended up with a FL 1.8.
Guess what? I love em!!
Admittedly, I had a Skoda VRS diesel in between the TF and the FL, which was awesome, but i do like the the k series motor. Simple, easy to fix, reliable and easy to 'fettle' if you desire.
Russ
 
Very easy to do, just unbolt the old one, bolt on the new and re-attach throttle cable and throttle position sensor wiring. Takes about 20 mins.

Also won't warp like the 48mm plastic throttle body.

Thanks for that. I've got another week off work next week, so think I'll give this a go.

Real K Series fans will probably already have seen this, but there's a couple of good videos on Youtube about the design of the K series.

[nomedia="http://www.youtube.com/watch?v=4tb-ucz_Fpg"]YouTube- Rover K-Series Engine Part One[/nomedia]

[nomedia="http://www.youtube.com/watch?v=Os3b6hVOrFg"]YouTube- Rover K-Series Engine Part Two[/nomedia]
 
Back
Top