Got Me Nuts Stuck!

bastid came to do the panhard rod bush 2day an the bolt feels like its rusted its self to the steel bush inner liner,
the bolt wont turn, but i can get the nut off, but theres not enuff room to t-w-a-t with a big hammer,
an i can't think how i could get it out,
any ideas folks?

nickh75 said:

bastid came to do the panhard rod bush 2day an the bolt feels like its rusted its self to the steel bush inner liner,
the bolt wont turn, but i can get the nut off, but theres not enuff room to t-w-a-t with a big hammer,
an i can't think how i could get it out,
any ideas folks?

Click to expand...

Have ye got a wreckin' bar nick? (big long rat**** type thing)
Or how about givin' the panhard a few chaps with a hammer in case the bolt is jammed against the bracket
Or stick the nut back on so far and use a big jemmy/ lever
or heat it up with yer blow torch
or just have sum more beer

Mine was put in with the bolt head out the outside so couldn't get enough room to swing a big hammer on the inside, so I hacksawed the head off an hotted the whole thing up till the rubber was smoking like fook (do this bit carefully or you'll blow the hole universe up) blathered it in WD40 to make some more smoke then brayed fook out of it, an it eventually gave up.

When you put the new uns in coat the bolt with assembly paste an put it in from the inside, then when someone digs it up in a brazillion years time they'll be able to get it undone.

bustersbus said:

Have ye got a wreckin' bar nick? (big long rat**** type thing)

Click to expand...

bustersbus said:

Or how about givin' the panhard a few chaps with a hammer in case the bolt is jammed against the bracket
Or stick the nut back on so far and use a big jemmy/ lever
or heat it up with yer blow torch
or just have sum more beer

Click to expand...

i tried all that apart from the last one which i'm tryin now
i used about half a tin of wd40 anall, it was fun when i got the blow torch on it
i'll give it another good bashing 2moro an see what happens
it,s not gonna beat me

GRUNT said:

Mine was put in with the bolt head out the outside so couldn't get enough room to swing a big hammer on the inside, so I hacksawed the head off an hotted the whole thing up till the rubber was smoking like fook (do this bit carefully or you'll blow the hole universe up) blathered it in WD40 to make some more smoke then brayed fook out of it, an it eventually gave up.

When you put the new uns in coat the bolt with assembly paste an put it in from the inside, then when someone digs it up in a brazillion years time they'll be able to get it undone.

Click to expand...

mine's been done the same as yours grunt, int it fookin anoying

WD40 is crap for jobs like that.
Get some GT85 on it - that stuff penetrates much betterer.

i only used the WD to make more smoke an it does that quite well, if you try reely hard you can get a small fire going.

nickh75 said:

mine's been done the same as yours grunt, int it fookin anoying

Click to expand...

So was mine, but ah still put them back the same way when ah did my bushes

Treworgey 90 said:

WD40 is crap for jobs like that.
Get some GT85 on it - that stuff penetrates much betterer.

Click to expand...

Bloody good stuff that Trewy, use it meself
makes yer rollups taste bloody horrible tho'

I like the smell of it.
Shame the doris wunt use it instead of that stoopidly expensive perfume.

Treworgey 90 said:

I like the smell of it.
Shame the doris wunt use it instead of that stoopidly expensive perfume.

Click to expand...

Ye could always try stickin' it in a fancy perfume bottle and tell her it costs a fortune then see if she notices

got something from work called molicule13, dont know if it'll werk but one of the fitters gave it me an said it cost £25 a fookin tin
glad i dint av t ay for it

Where would one get a tin of gt85, don't recall seein it in the likes of halfords?

JAC said:

Where would one get a tin of gt85, don't recall seein it in the likes of halfords?

Click to expand...

Trago!

have you tried www gt85 co uk?

JAC said:

Where would one get a tin of gt85, don't recall seein it in the likes of halfords?

Click to expand...

Halfords. The bikehut bit love it up there. At least, ours does.

JAC said:

Where would one get a tin of gt85, don't recall seein it in the likes of halfords?

Click to expand...

Get mine from partco in a big plastic spray bottle