Disco 4 (LR4) good afternoon could anyone advise me on a p006a fault please

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
E

elliottpre

Member
Posts
14
Location
kent
only 2 days ago I had my car serviced (by a friend, not by land rover) with all the filters changed and within about 30 miles I had the restricted performance light come on and he has diagnosed fault code P006A.

it seems to come on after about 3 miles after driving and it has been diagnosed as fault code P006A
on of the mass air flow metres has now been replaced and the map sensor was not very dirty but cleaned anyway, local land rover dealers cannot book be in for at least 4 weeks and I am a bit stuck, was about to buy a map sensor but didn't want to just thro things at it especially as it looked in reasonable condition.

Also I cant help thinking that it is a bit coincidental that it was fine before service.

any suggestions would be appreciated
 
No direct experience with discovery, but check that all the air intake hoses are in good order and correctly secured, if you have some air flow into the engine not metered by the air flow sensor it may throw a fault code
 
The code you’ve got relates to the map sensor readings, which in turn could be related to the egr valves, you could do with a look at the live data to see what isn’t working. What diagnostics tool did you read the fault with?
 
Thanks for making contact, apart from brake fluid and oil we changed fuel filter , oil filter , pollen filter ,air filter and set oil level.
 
johnlad said:
The code you’ve got relates to the map sensor readings, which in turn could be related to the egr valves, you could do with a look at the live data to see what isn’t working. What diagnostics tool did you read the fault with?
Click to expand...
Thank you, I would have to find out the exact model type but it was a snap on diagnostics pad.
 
elliottpre said:
only 2 days ago I had my car serviced (by a friend, not by land rover) with all the filters changed and within about 30 miles I had the restricted performance light come on and he has diagnosed fault code P006A.

it seems to come on after about 3 miles after driving and it has been diagnosed as fault code P006A
on of the mass air flow metres has now been replaced and the map sensor was not very dirty but cleaned anyway, local land rover dealers cannot book be in for at least 4 weeks and I am a bit stuck, was about to buy a map sensor but didn't want to just thro things at it especially as it looked in reasonable condition.

Also I cant help thinking that it is a bit coincidental that it was fine before service.

any suggestions would be appreciated
Click to expand...

Hi

Plus 1 what’s been mentioned ref live data , that will be ur first port of call, clear the fault codes and see what comes back up, then can read the live data

That code also covers a cracked inlet manifold / or sticking turbo solenoid valve

Also make sure no hoses have been left off , recheck MAP sensor is plugged in properly

Assume a screwdriver etc wasn’t poked down the end of the MAP sensor

Is urs the 8 x speed model with adblue

Plse let us know how u get on
 
gstuart said:
Hi

Plus 1 what’s been mentioned ref live data , that will be ur first port of call, clear the fault codes and see what comes back up, then can read the live data

That code also covers a cracked inlet manifold / or sticking turbo solenoid valve

Also make sure no hoses have been left off , recheck MAP sensor is plugged in properly

Assume a screwdriver etc wasn’t poked down the end of the MAP sensor

Is urs the 8 x speed model with adblue

Plse let us know how u get on
Click to expand...
gstuart said:
Hi

Plus 1 what’s been mentioned ref live data , that will be ur first port of call, clear the fault codes and see what comes back up, then can read the live data

That code also covers a cracked inlet manifold / or sticking turbo solenoid valve

Also make sure no hoses have been left off , recheck MAP sensor is plugged in properly

Assume a screwdriver etc wasn’t poked down the end of the MAP sensor

Is urs the 8 x speed model with adblue

Plse let us know how u get on
Click to expand...
Thank you for your help, it is the 8 speed and I will let you know how I get on.
 
@johnlad

They make it simple, lol

2FA0279A-F0A4-4799-982E-8FAC401CFEE6.png
 
Anything but simple I have the same problem ! Ive changed the sensor on Bank 1 and swapped it around a few times ,Still I keep getting the restricted power thing, Incidentally this clears itself after awhile if I leave the car!. Ive pumped smoke down the ports and still cannot see any leak! The car is running fine when the code not there . it don't blow smoke so Im at a loss with this thing
 
Haven’t had much luck but I Just had a thought- I think it’s the battery I changed it recently . It’s an optima blue top. Is this a possibility
 
You must log in or register to reply here.

Similar threads

G
Disco 2 TD5 white smoke at idle
Replies
18
Views
892
GaryWrench
G
Kayvoh87
Land Rover Discovery 4 Suspension Fault
Replies
8
Views
666
Kayvoh87
Kayvoh87
J
Disco 3 (LR3) Air suspension fault
2 3
Replies
45
Views
5K
gstuart
gstuart
M
Freeland 2 SD4 HSE - intermittent fault ,wont go over 3000rpm
Replies
9
Views
1K
Rank Amatuer
Rank Amatuer
Pcpilot53
Disco 3 (LR3) Starts then immediately cuts out?
2
Replies
23
Views
2K
Graculus
Graculus
Back
Top