give you a race then Stuart(vouge)/can i fit any more under hood?
- Thread starter zen
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kds
Well-Known Member
- Posts
- 2,317
- Location
- old,ugly, tired in Lincoln.
But does it run Zen ?
kds
Well-Known Member
- Posts
- 2,317
- Location
- old,ugly, tired in Lincoln.
So whats left to fit under there, nitros ?
kds
Well-Known Member
- Posts
- 2,317
- Location
- old,ugly, tired in Lincoln.
Bet it goes like hell between petrol stations ha ha !
Datatek
Well-Known Member
- Posts
- 45,812
- Location
- Near Poitiers SW France
Wow you found a way of forcing even more fuel into your gas guzzler!
mattstevenson2005
Active Member
- Posts
- 548
- Location
- Manchester UK
whats its performance figures over standard?
Matt
Matt
craig_midz
New Member
- Posts
- 79
- Location
- walsall
what have u had to do to the engine to fit that as i wanted to fit a jag supercharger to my 4 litre thor engine but got told id have to change all the internals of the engine first is this true ?
vougese39
Well-Known Member
- Posts
- 1,039
ready and waiting Zen will have my rrc and d2 with my exocet engine.
one thing that worries me is al the excess heat could warp that bonnet lol
as for the supper charger on d2 v8 yes you will need to uprate some of the internals and flow the heads and replace the cam
one thing that worries me is al the excess heat could warp that bonnet lol
as for the supper charger on d2 v8 yes you will need to uprate some of the internals and flow the heads and replace the cam
yep..pooy ex yankie cast off...
no internal mods on mine..they are already built to race engine spec.(forged everything out of factory!!7k red line,32v, quad cam..all for £80.).but to use more boost than i plan i would need an aftermarket ecu..stock ecu and injectors are good for 8psi..
no internal mods on mine..they are already built to race engine spec.(forged everything out of factory!!7k red line,32v, quad cam..all for £80.).but to use more boost than i plan i would need an aftermarket ecu..stock ecu and injectors are good for 8psi..
ⓡⓤⓓⓨ
Active Member
- Posts
- 163
- Location
- Loch Lomond, Scotland
yep..pooy ex yankie cast off...
no internal mods on mine..they are already built to race engine spec.(forged everything out of factory!!7k red line,32v, quad cam..all for £80.).but to use more boost than i plan i would need an aftermarket ecu..stock ecu and injectors are good for 8psi..
Ad not to forget 260BHP standard
craig_midz
New Member
- Posts
- 79
- Location
- walsall
what engine is it then ?
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
Ill race you in my bmw
ⓡⓤⓓⓨ
Active Member
- Posts
- 163
- Location
- Loch Lomond, Scotland
Lexus 4.0 V8 as fitted in the Lexus Ls400 and Toyota/Lexus Soarer.
craig_midz
New Member
- Posts
- 79
- Location
- walsall
bet that took some conversion to fit didnt it
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
big hammer and some wire
