Gear box mode switch
- Thread starter MJI
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
xat44
Active Member
- Posts
- 474
- Location
- biggin on the bump
cant answer your question. but this may help.
Rebuild D2 ZF Selector Switch UHB100190 - Australian Land Rover Owners
Rebuild D2 ZF Selector Switch UHB100190 - Australian Land Rover Owners
Dafman1990
New Member
- Posts
- 57
- Location
- Worcestershire
Hi, yes they are took one off a v8 for my Td5 and all working fine since
Sam
Sam
Dafman1990
New Member
- Posts
- 57
- Location
- Worcestershire
I'll have a look see if I've still got my old one, we have wen them apart and cleaned the contacts etc at work before but they do t last long before they're gone again in my experience, mine worked with no m and s lights but wouldn't reverse
Sam
Sam
I am not bad with electrics and electronics, I converted a VCR to NICAM, I repair keyfobs, basically happy to play with anything from SMD to mains.
So happy to give it a go and see what can be done
Dafman1990
New Member
- Posts
- 57
- Location
- Worcestershire
I'll have a look at work tomorow see if it's still there if so your welcome to it, just a thought, the p38 uses the same switch with a different plug, has anyone tried swapping the plug to a disco type? As they're around £40 SH
If I have the parts I could swap them over.
I like dining room projects (near PC and a socket for my soldering iron)
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
That's an enormous difference !!!!! Are you sure about that? Swapping the plug of the existing faulty one should take any effort at all.
Dave
Similar threads
