Fuel Tank - Plastic Pipe - Where does it go?

Greetings,

I put my fuel tank back in today, after the 3 months that it's taken me to replace the boot floor and do the front inner wings. Anyway, there's a plastic pipe and I can't remember/find where it's supposed to be connected. I've had a look at Microcat, and I believe that it's 'Pipe - Breather Fuel Tank - ESR461'. It's about 6mm diameter, with a green plastic push-fit looking type connector on the end. Thing is, I've got a 20mm+ pipe going up to the fuel filler which is what I thought was the breather, and I've no idea where this other one goes. Any ideas?

Ta

Yes the 20mm + pipe is a breather, the smaller one is part of the multi-vent system thing. Provided a Disco is the same set up as an RRC the pipe I think you are on about looks a bit like a large axle breather and is secured to a plastic clip on the front of the cross member in front of the fuel tank. You'll know where it goes as the pipe should hopefully want to naturally fit where it came from if you know what I mean. HTH

Thanks for that, I think you're bang on sorry for the delay responding!

Tom.