I have a fuel leak at the fuel pressure regulator, i am going to change the gasket on it is it a straight forward job? any help would be great Cheers. Discovery 2 TD5 1998
Fuel pressure regulator
- Thread starter defender2
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
usually leaks out of regulator,i remove lifting eye and you will need 10mm socket and extension for bottom bolt ,i have to lay over rocker box to get my hands in
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
an hour
sparky steve
Active Member
- Posts
- 226
- Location
- chester
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
not as quick as i used to be ,ive worn my arms out
sierrafery
Well-Known Member
- Posts
- 18,236
- Location
- Arad/Romania
it depends on your handiness ... one way is here TD5 Disco fuel pressure regulator - LR4x4 - The Land Rover Forum
mikes lr
New Member
- Posts
- 196
- Location
- falkirk scotland
not the easyist of jobs bottom bolt is a pain to get at and mayby a skint knuckle or to enjoy
sparky steve
Active Member
- Posts
- 226
- Location
- chester
not the easyist of jobs bottom bolt is a pain to get at and mayby a skint knuckle or to enjoy
easy using a 1/4 drive socket on a long extention.
putting the bolt back in just cover head with a small bit of electrical tape and stick on socket..
mikes lr
New Member
- Posts
- 196
- Location
- falkirk scotland
yep i used super glue done the trick but not easy with motor neuron disease /i got shaky hands like
