Front steering Bar

border · Jan 31, 2016

Got the nut loose and adjuster moving, had to turn adjuster a few turns before it tightened the play up. Seems a lot better now but wheel seems a little out of alignment not sure if Ive done it correct. How do I centralise the box first??
Thanks

The Mad Hat Man · Jan 31, 2016

get someone to centralise the steeringm move steering to align hole in bottom of steering box and then fit a 6?mm drill into the bottom of the steering box.

border · Jan 31, 2016

The Mad Hat Man said:
get someone to centralise the steeringm move steering to align hole in bottom of steering box and then fit a 6?mm drill into the bottom of the steering box.

View attachment 95998

Never new that was there, too dark now.
I loosed it off a little and the play is much better now, next time I will use the drill bit to centralise and do it again.
Thanks

jamesmartin · Jan 31, 2016

border said:
Never new that was there, too dark now.
I loosed it off a little and the play is much better now, next time I will use the drill bit to centralise and do it again.
Thanks

you centralise steering wheel to suit the centralised box ,either by removing steering wheel or at the linkage ujs

flat · Jan 31, 2016

Kwakerman said:
Replace the ball joint with the arm still on the vehicle, a lot less hassle than trying to get the arm off.

Absolutely.

tottot · Jan 31, 2016

+1 the above.

Front steering Bar

border

Well-Known Member

The Mad Hat Man

Well-Known Member

border

Well-Known Member

jamesmartin

Well-Known Member

flat

Well-Known Member

Attachments

tottot

Well-Known Member

Similar threads