Front Interior Light Wont Work

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

Dixie5bug

Member
Posts
32
Location
Bicester Oxfordshire
Hi All,

My front interior light wont work:(, I've checked the fuses and changed the bulb, it used to work when I first got the car but has stopped any ideas?:confused:


Thanks Andy :dnfnoob:
 
you must measure there in the holder to see what's missing, it must have permannent feed and the light-up command is on the earth path, from BCU on automatic and through the switch on manual... does it work if you manually switch it on?...if not the feed is missing, and as it's common for all 3 of them untill C0723(attached) the problem is between this header and the bulb holder, pin 15-purple wire must be the feed for front lamp, at pin 18(also purple) you must have permannent feed(do not mix the purple wires with purple/blue cos that's the earth path)
 

Attachments

  • C0723.JPG
    C0723.JPG
    36.8 KB · Views: 192
sierrafery said:
you must measure there in the holder to see what's missing, it must have permannent feed and the light-up command is on the earth path, from BCU on automatic and through the switch on manual... does it work if you manually switch it on?...if not the feed is missing, and as it's common for all 3 of them untill C0723(attached) the problem is between this header and the bulb holder, pin 15-purple wire must be the feed for front lamp, at pin 18(also purple) you must have permannent feed(do not mix the purple wires with purple/blue cos that's the earth path)
Click to expand...


I'll grab a meter off the engineers at work tomorrow and check it out, thanks :)
 
Get a copy of the Rave wiring diagrams rather than the Haynes crayon drawings as it is easier to see what was what...

It may turn out that the main loom has been damaged near the under bonnet fuse box...

There may a bluish coating to the wires some of which may have been eaten all the way through, we had some on the screenwash pumps and headlights ...
 
Dippypud said:
Get a copy of the Rave wiring diagrams rather than the Haynes crayon drawings as it is easier to see what was what...

It may turn out that the main loom has been damaged near the under bonnet fuse box...

There may a bluish coating to the wires some of which may have been eaten all the way through, we had some on the screenwash pumps and headlights ...
Click to expand...
RAVE is what i'm looking at and as i said the feed for all the 3 roof lamps is common( one wire) from the fusebox untill that header i attached, there it splits to the 3 lamps, so what you say it's wrong cos then no lamp would work... that's why i asked about that in the first place, if you see what i mean... believe me, when it comes about electrics i'm rarely wrong(...though it happens... but not now :))
 
Last edited:
sierrafery said:
RAVE is what i'm looking at and as i said the feed for all the 3 roof lamps is common( one wire) from the fusebox untill that header i attached, there it splits to the 3 lamps, so what you say it's wrong cos then no lamp would work... that's why i asked about that in the first place, if you see what i mean... believe me, when it comes about electrics i'm rarely wrong(...though it happens... but not now :))
Click to expand...


Lol according my wife I'm always wrong :rolleyes:
Thanks for the help guys I'll check it out tomorrow :)
 
You must log in or register to reply here.

Similar threads

J
td5 non start - No fuel pump power, No ecu Light, Nanocom cant communicate with ecu
Replies
8
Views
902
Stanleysteamer
Stanleysteamer
S
Electrical Gremlins L/ Rear Tail / Number Plate / Central Locking
Replies
1
Views
488
sierrafery
sierrafery
D
Amigos and new friend!
2
Replies
20
Views
1K
Anaconda
A
D
Cabin interior light not working
Replies
1
Views
595
Hellsteeth
Hellsteeth
StuRox
Disco 1 Interior Light door switch wiring
Replies
11
Views
2K
GIlbert114
G
Back
Top