Front Drive Shaft CV/Gator boot

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Cookiesa

New Member
Posts
2
Location
Adelaide, South Australia
Hi all, hoping someone may know the answer…. finding buying just the gator boot or a gator boot/cv combo for the front driveshaft (between VCU and front axle for clarification) very difficult!

boot has been split and it’s thrown the grease… figure I may as well do the joint as well if possible while 8m there…)

Otherwise Im going to throw in a replacement drive shaft (please correct me if I’m wrong but all the FL1 drive shafts I believe are the same with the exception of the v6 not having the balancer)
 

Attachments

  • IMG_0239.jpeg
    IMG_0239.jpeg
    326.5 KB · Views: 93
Found this...


The part number they quote though appears to be for the whole front shaft not just the gaiter. Maybe it isn't a LR orderable part so has no number?

I think you can probably use a V6 shaft on other engines and visa versa - but don't hold me to it. If you replace the whole prop mechanism including VCU - be careful as the replacement VCU may be knackered even if the props are OK. Make sure you test it.
 
On the Rimmer Bros site, for the diesels and the K series 1800:

Gaiter Kit Front Drive Shaft Inner
TDR100700 = genuine, P = aftermarket or P1 = OEM


Gaiter Kit Front Drive Shaft Outer
TD100750 = genuine, P = aftermarket or P1 = OEM

Land Rover Direct also stock these
 
Back
Top