Drive shaft joint constant velocity boot split offside front Range Rover L322 2010 Vogue SE 4.4 TDV8

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Brucey89

Brucey89

New Member
Posts
2
Hi Fellow Landy members,

Looking for some guidance. I have been advised to replace Drive shaft CV boot which has split on offside front. Given the fact it's a fairly small part and labour costs very high, is it worth sourcing part from land rover parts specialists and getting it fitted by a non-landy garage? Thanks

Best wishes

B
 
Brucey89 said:
Hi Fellow Landy members,

Looking for some guidance. I have been advised to replace Drive shaft CV boot which has split on offside front. Given the fact it's a fairly small part and labour costs very high, is it worth sourcing part from land rover parts specialists and getting it fitted by a non-landy garage? Thanks

Best wishes

B
Click to expand...
I don't know about in the UK, but here many garages will only fit parts that they have supplied.
Island 4 x 4 are a good source of parts if you are able to DIY.
 
If you supply the part and it fails, no come back
They supply it then you gave a case to argue.
Get a decent quality part fitted, you don't want to pay to get it done again.
Get it done soon before all the grease escapes and the dirt gets in, or it will cost even more.
Any mechanic should be able to do it.
How much does it cost, out of interest?
 
Brucey89 said:
Hi Fellow Landy members,

Looking for some guidance. I have been advised to replace Drive shaft CV boot which has split on offside front. Given the fact it's a fairly small part and labour costs very high, is it worth sourcing part from land rover parts specialists and getting it fitted by a non-landy garage? Thanks

Best wishes

B
Click to expand...
Any independent landy garage round you? It'll be bread and butter to them
 
many thanks all. After further inspection a landy specialist has suggested to replace Cv joint as the boots are more difficult to fit onto existing one (may come off) and it’s only an extra £100 to do this. Quoted £365 including vat for Cv joint offside front with boot. Cv boot alone is £273 from another garage. Labour as mentioned main cost. What do you think? Thanks. B
 
Brucey89 said:
many thanks all. After further inspection a landy specialist has suggested to replace Cv joint as the boots are more difficult to fit onto existing one (may come off) and it’s only an extra £100 to do this. Quoted £365 including vat for Cv joint offside front with boot. Cv boot alone is £273 from another garage. Labour as mentioned main cost. What do you think? Thanks. B
Click to expand...
Sounds pretty good to me.
 
And doing it yourself will mean getting hold of a 450nm torque wrench. And a few other bits and pieces

1700176656226.png
 
Doing it yourself is a world of pain waiting, unless you have a FULLY equiped set up...usually they havebeen on so long they require massive effort to move, if you have a garage you trust or one that is highly recommended by a friend that is the best way to go ...unless you have a huge amount of time on your hands and a willing assistant± Good luck!
 
1988smithy said:
Any independent landy garage round you? It'll be bread and butter to them
Click to expand...
Bread and butter? When @My Old Landy took @biketeacherdave old P38 to a local garage they refused to do the swivel ball joints as they didn’t want it stuck on a ramp. CV boot (similar tear down) is a simple job if the neighbouring parts aren’t welded together. Just do it yourself ;) Ironically I nicked the cv boot removing the driveshaft so I’ve got all to do again 🤪
 
doriz said:
Bread and butter? When @My Old Landy took @biketeacherdave old P38 to a local garage they refused to do the swivel ball joints as they didn’t want it stuck on a ramp. CV boot (similar tear down) is a simple job if the neighbouring parts aren’t welded together. Just do it yourself ;) Ironically I nicked the cv boot removing the driveshaft so I’ve got all to do again 🤪
Click to expand...
Absolutely, it really annoyed me to the extent we now go to a different garage for servicing and MOT etc.
Being disabled means you have to rely on garages or you have to sell :(
 
doriz said:
Bread and butter? When @My Old Landy took @biketeacherdave old P38 to a local garage they refused to do the swivel ball joints as they didn’t want it stuck on a ramp. CV boot (similar tear down) is a simple job if the neighbouring parts aren’t welded together. Just do it yourself ;) Ironically I nicked the cv boot removing the driveshaft so I’ve got all to do again 🤪
Click to expand...
I've got 3 good uns by me that **** this kind of thing before breakfast 😜
 
doriz said:
Bread and butter? When @My Old Landy took @biketeacherdave old P38 to a local garage they refused to do the swivel ball joints as they didn’t want it stuck on a ramp. CV boot (similar tear down) is a simple job if the neighbouring parts aren’t welded together. Just do it yourself ;) Ironically I nicked the cv boot removing the driveshaft so I’ve got all to do again 🤪
Click to expand...
My son found a local garage who were willing to do his D2 ball joints. Couple of months down the line I noticed the cv boot needed changing. On inspection I think they must have nicked it bolting the hub back on. Easy done I guess as it's quite tight getting a ratchet in there.
 
You must log in or register to reply here.

Similar threads

C
Front Drive Shaft CV/Gator boot
Replies
4
Views
1K
htr
htr
ronsealdeath
1990 Range Rover Classic 3.9 v8i Auto
Replies
4
Views
2K
Shabs
S
Back
Top