Front Bumper

Anyone has removed front bumper before? Is it hard? I have the RAVE CD but any advise would good.
Try to locate to mount oil cooler behind the bumper.

easy job..........4 screws on the top of the grille, 2 screws in the wheel arches on each side which secure the arch trim to the bumper, 2 screws (on each side) underneath which hold the lower part of the wheel arch liner to the bumper, 2 screws where the under tray goes on, take off a square plastic cover from up inside the wheel arches, pull the arch liner out from behind the bumper and there are 2 10mm bolts (1 on each side) which secure the bumper to the wing and 3 or 4 (cant remember!) plastic trim clips under the number plate, give it a yank and it'll come off

yes it was easy if you can find 2 bolts securing rear edge of frontbumper to inner front wing. thanks clutchdust!!
Took off the bumper and yes I think I should be able to put an engine oil cooler infron of A/C rad.
Time to order oil cooler. wish me luck

where from?
wot make?
how much?

not sure its a good idea to put oil cooler rad infront of A/C radiator, as it would mean that hot air is being passed thro the A/C rad. Not so efficient cooling.

There was one compact engine cooler on ebay but it already ended
For me in Oz, sometime it is cheaper to get stuff from US even with delivery charges.
Just put a small oil cooler so you wont block the whole A/C rad. I would say you put just infront of A/C, can screw together with power steering oil cooler.

K - i cant say i have studied it in detail.

did you fit that oil cooler? did it help cool the engine?