lozzer 1975
New Member
- Posts
- 6
Clutch pedal is about and inch or more above brake pedal, drives as normal and selects gears ok biting point is normal,,changed return spring but made no difference, a bit confused to what it could be
Freelander 2 (LR2) Freelander2 clutch pedal too high
- Thread starter lozzer 1975
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
lozzer 1975
New Member
- Posts
- 6
Sorry its a 2011xs with stop start
The clutch cover is self adjusting on these, so a high pedal suggests that the clutch adjusting mechanism has run out of further adjustment because the clutch is worn out. I suppose it's possible the adjusting mechanism has got stuck, but it's not as likely as the clutch being worn out.
How many miles is on it?
How many miles is on it?
lozzer 1975
New Member
- Posts
- 6
Hi its done 140k had new clutch ,slave cylinder and duel mass done about 20k miles ago, the pedal had an annoying creek when changing gears so changed the return spring on pedal the pedal was already high though this would fix it
lozzer 1975
New Member
- Posts
- 6
It fixed the creek but pedal still high
lozzer 1975
New Member
- Posts
- 6
Sure it was LUK drives as normal but pedal high, other than the return spring nothing on the pedal its self to control its hight
lozzer 1975
New Member
- Posts
- 6
So now fixed this and changed the master cylinder
Similar threads
