Have recently replaced the VCU on my Freelander due to slight wind up at low speeds.
Obtained a new VCU and some cheap support bearings. Once replaced there was a knock / rattle from the prop when turning left or right at low speeds ( 15 mph or less ) .
My garage says it is due to poor non Landrover support bearings allowing the prop to knock in the bearings.
Has anyone else come across this problem .
Obtained a new VCU and some cheap support bearings. Once replaced there was a knock / rattle from the prop when turning left or right at low speeds ( 15 mph or less ) .
My garage says it is due to poor non Landrover support bearings allowing the prop to knock in the bearings.
Has anyone else come across this problem .