Freelander td4 2.0 clutch cylinder

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hi,
Thanks for your reply,one more question, if The muster cylinder brakes down and needs to be replaced you must replace The slave cylinder as well ?
 
You don’t have to but it is considered best practice

As the slave cylinder is inside the gearbox bell housing on a Td4 its not a quick job to do the slave cylinder
 
Are you sure it’s the master? You can disconnect it just above the gearbox - if the pedal goes stiff, then the master is probably OK.
 
Back
Top