Freelander - How do I fit a commercial gaurd & boards?

Holty1 · May 5, 2010

Hi,
New to the forum and recently bought a 3 door 2005 XEI TD4 with the intention of turning it into a dog-friendly commercial.
I subsequently bought the gaurd and board (now boards as sawn in the middle due to removal access?) and mat with a host of brackets and some bolts.... but no real idea as to where these pick up?

Anyone out there got a manual/catalogue showing the bracket locations and pick-ups or how the boards are bolted in..... Photo's?

Much appreciated if you have

Thanks

Holty

Optimus Prime · May 5, 2010

if you can wait a day or so, i'll take some piccies of mine

Holty1 · May 8, 2010

That would be great, thanks. Each different pick up of the guard and where the boards bolt to would really help. PM if that would be easier?

Holty

Holty1 · May 17, 2010

Any Photo's?

Optimus Prime · May 18, 2010

sorry holty, been right mad work wise. will try to upload tomorrow for you.

Stuarts the man · May 19, 2010

from what i can remember, front guard bolts onto bottom seatbelt mounts, under headlining abount two inches above top seatbelt mount you will find two holes, this mounts top of guard. middle brackets mounts onto front edge of wooden flooring. all holes for mounting straps are already in floor. remove carpets in back. To get floor out in 1 pice you need to remove hardback. do you have plastic side panels. Hope this helps
i also have a full van conversion for sale for £50

Freelander - How do I fit a commercial gaurd & boards?

Holty1

Member

Optimus Prime

Well-Known Member

Holty1

Member

Holty1

Member

Optimus Prime

Well-Known Member

Stuarts the man

New Member

Similar threads