Freelander Fog lights or driving lights etc

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

moog

New Member
Posts
38
Hi

I am after fitting some foglights to my TD4 2005 E

As i have none...i have seen some kits....but wondered if you can get the recessed ones like the factory fitted fellas

i have seen this on ebay

eBay - The UK's Online Marketplace

is this for a pre face life hippo only?...

also any ideas on fitting extra spots to bumper etc would be a help....

llive in the hills and like to see what night 'roadkill' im producing! :D
 
These are for the facelift model.
silkwood-albums-my-2005-java-black-fl1-td4-picture4212-genuine-lr-part-vub500870-driving-lamp-kit-vub500870.jpg

silkwood-albums-my-2005-java-black-fl1-td4-picture3978-freelander-td4-silkwood-driving-lamp-kit-vub500870-http-freelander-forumup.jpg


Genuine LR Driving lamp kit VUB500870
 
Are they the Driving lights or fog lights....

have seen those kits ....but am after the same factory fog lghts you have ...

if not avail does anyone know the part numbers for the 2 diff add on kits....

just not to keen on the fact they look plasticy and stick out.....

spose i could get them sprayed ....will they take paint?

many thanks
 
I have the standard Freelander foglights on the front outside. The "built in" ones. I think it is partnumber XBJ500020. Also you need the ring around it. The rings for the FL 2 don't fit. I think you need the ring DXB500030LML
I.m not sure if these fit I you have a FBH.

The "built on" ones I have are Driving lights VUB500870. I think they are paintable.
 
For the factory fitted fog lights the code for the LH fog lamp bezel is DXB500270LML , I don't know the code for the right hand bezel but they cost approx £35.00 each unpainted as you can only get genuine ones and there haven't been any on flea bay in the last 12 months only freelander 2 ones which are too big.
They should fit as mine are factory fitted and i have a fuel burning heater.
 
Last edited:
cheers guys.....

DXB500270LML....im just wondering is this just the besel?...or inc fixing kit etc....

been trying breakers to see if any bumpers with all the bits in but no joy...

anyone know any decent breakers online?...

that wouls prob be best bet if i attempt the flush ones

other than that seem like i might end up with the protruding fogs and driving lights.....as think puting just one on would look a bit unbalanced...

the drving ones look good alongside the fact fit spots..

will keep my eyes peeled on the bay...
 
DXB500270LML is just for the bezel / trim that clips into the bumper to cover the mounting hole for the foglight.
 
Back
Top