Freelander 1 don t start

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Your best bet is to read the live data, so you can determine the low pressure fuel supply is at a high enough pressure to allow the engine to run.

It also doesn't sound like cranking fast enough to start.

I don't know if having the MAP sensor unplugged is going to stop is running too.
 
Last edited:
Are the missing bits not important ??? or am I missing something...
Click to expand...
mmmmmmmmmmmmmmmmm ..;-\

no airflow over the maf sensor .. [ in vid. ]

[ no map sensor .. as prev mentioned ]
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
 
Last edited:
badboy71 said:
hi guys the problem is my camsaft it.s broken in two, all i can do is to buy another engine, my is broke...
Click to expand...
A broken camshaft??:eek::eek: Are you sure? I've never come across an M47 with a broken camshaft, but several broken crankshafts.
 
Yes
the shaft is broken in two together with the bearings and jumped from the signs, the peak still spins even if it is broken
 
where the arrow is first the shaft is broken, after the bearings are broken
 

Attachments

  • Inkedrupt_LI.jpg
    Inkedrupt_LI.jpg
    103.3 KB · Views: 122
That will be why it won't start then!!!

Seen it all now.

Where in Romania are you? I was in Brasov a few years ago and also enjoyed the Transilvanian mountains.
 
You must log in or register to reply here.

Similar threads

M
2003 FREELANDER HEATED REAR SCREEN
Replies
2
Views
377
andyfreelandy
andyfreelandy
M
Crankshaft pulley for FL1 1.8 K-Series 2005 model
Replies
5
Views
612
andyfreelandy
andyfreelandy
A
205/65R15 good to go on Freelander ?
Replies
14
Views
2K
Arnodafe72
A
M
My 3 door Sport Just delivered
Replies
8
Views
976
andyfreelandy
andyfreelandy
A
205/65R15 good to go on Freelander ?
Replies
0
Views
230
Arnodafe72
A
Back
Top