Freelander 1.8 faults new parts still the same

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Stig1

Active Member
Posts
114
Location
West midlands
Can anyone help me on this one please. Been chasing faults on this car 2003 1.8 petrol for a few weeks now and keep changing parts to no avail . We have changed the rear 02 sensor c Genuine bosch part still showing a fault . Changed the purge valve and charcoal canister and still getting purge valve faults not sure what to check next
 

Attachments

  • 20210516_115343.jpg
    20210516_115343.jpg
    260.6 KB · Views: 73
For anyone who may have a similar fault its now sorted and no more pressure in the fuel tank
 

Attachments

  • 20210516_153258.jpg
    20210516_153258.jpg
    344.2 KB · Views: 80
What did you do? Replace the arrowed fuse? Be helpful to others finding this thread with a similar problem. Thanks
 
For anyone who may have a similar fault its now sorted and no more pressure in the fuel tank
It's funny.
I read this thread this morning, but was busy and didn't have time to answer, but I was thinking the fuses were worth checking, as more than one item was effected.
Glad you're sorted.
 
Yes replaced that fuse but the reason it had blown the rear lambda sensor wire had rubbed on the prop

Thanks, that's what we need to close the thread off and a title edit to 'solved'. Helps so much when folks are sifting through later.
 
Back
Top