foreign object in carburettor

S

sprie

Active Member

Posts

232

• Aug 2, 2023

• #1

I removed my weber carb today from the car, and I immediately noticed a strange object sitting just under the butterfly. It appears to be made of thick foil.

I am thinking this is a stray piece of rubbish that has somehow made it into the carb, but I can’t imagine how something of this size could find its way past the oil filter by chance.

1. Has this been put there on purpose?
2. If not, does anyone recognise what it might be or where it could come from.

p.s. also note the nonstandard use of a paperclip.

 

Attachments

• 
  20230802_065048.jpg

  376.3 KB · Views: 139

tottot

Well-Known Member

Posts

8,073

Location

west wales coast

• Aug 2, 2023

• #2

Could be a bit of foil like found on top of a new oil can/bottle, who knows but should not be there.
Good use of paper clip if split pin not available.

 

kermit_rr

Very

Full Member

Posts

33,886

Location

North Shropshire

• Aug 2, 2023

• #3

No idea how that could get past the butterfly! Is it actual foil or is it very thin like burnt paper but less brittle?

 

S

sprie

Active Member

Posts

232

• Aug 2, 2023

• #4

kermit_rr said:

No idea how that could get past the butterfly! Is it actual foil or is it very thin like burnt paper but less brittle?

Click to expand...

I have checked and it is definitely foil. Maybe a piece of packaging of some sort. I have removed the connecting tube & hose between the air filter and the carb, and it doesn't look like it has come from there.

 

steve2286w

Well-Known Member

Posts

4,573

Location

monkeyangerland

• Aug 6, 2023

• #5

Curious can you straighten it out and see what shape it goes into ignoring any bends that should be in it

 

S

sprie

Active Member

Posts

232

• Aug 6, 2023

• #6

steve2286w said:

Curious can you straighten it out and see what shape it goes into ignoring any bends that should be in it

Click to expand...

I have now removed the oil bath air filter to clean it up and I cannot for the life of me work out how this bit of foil could possibly have got into the carb. There is no sign of anywhere it could have detached from, there are obviously the mesh filters in place, and nothing obvious in the air hose etc. There is nothing on the foil to help identify it, on either side.

 

Attachments

• 
  20230806_183056.jpg

  381.5 KB · Views: 122

steve2286w

Well-Known Member

Posts

4,573

Location

monkeyangerland

• Aug 6, 2023

• #7

Snaps doesn’t look anything in particular and agree wouldn’t of been sucked through air filter but engine may have been run without filter on , looks like it’s been there a while though