fog lights fit

Datatek · Oct 22, 2013

gfromleeds said:
Is it legal to fit resistors on the fogs and use them at 50%brightness as drl's?

You would need some feckin enormous resistors

wammers · Oct 22, 2013

Datatek said:
You would need some feckin enormous resistors

Or 24 volt bulbs.

gfromleeds · Oct 27, 2013

Was just a thought cos I couldent find someone to activate them in becm but would prefer them to operate as fogs if anyone can do it for me near leeds?

davidg · Oct 28, 2013

Make sure the becm has a "H" (for High line) written on the becm label (on top of the becm fusebox). The Low line becm does not support front fog lights.

gfromleeds · Nov 1, 2013

davidg said:
Make sure the becm has a "H" (for High line) written on the becm label (on top of the becm fusebox). The Low line becm does not support front fog lights.

Realy? Thought all rangies had fogs execpt the diesel autos but thats down to the oil cooler
where is the label?

jacckk · Nov 1, 2013

If you have memory seats you'll have a high-line BECM.

Here's a photo showing the sticker location and the sticker itself

davidg · Nov 1, 2013

The Low line becm was a cost down version compared with the high line version and supported fewer features eg front fog lamps. A high line becm will work correctly in a low line becm vehicle but not the other way around.

wil2813 · Nov 2, 2013

davidg said:
make sure the becm has a "h" (for high line) written on the becm label (on top of the becm fusebox). The low line becm does not support front fog lights.

+1

gfromleeds · Nov 2, 2013

just been out and checked and it is a high line becm
when i was in there i noticed there is a few empty slots in the fuse box most on the diagram showed should be empty but no fuse in slot 18 and the diagram shows a 30a fuse should be in. whats that power?

gfromleeds · Nov 2, 2013

dont matter found on rave
it should be empty

wammers · Nov 2, 2013

gfromleeds said:
just been out and checked and it is a high line becm
when i was in there i noticed there is a few empty slots in the fuse box most on the diagram showed should be empty but no fuse in slot 18 and the diagram shows a 30a fuse should be in. whats that power?

5,16,18,19,21. Not used. What year diagram are you looking at?

gfromleeds · Nov 2, 2013

wammers said:
5,16,18,19,21. Not used. What year diagram are you looking at?

was the one on inside of fuse cover but looked it up on rave and it should be empty

wammers · Nov 2, 2013

gfromleeds said:
was the one on inside of fuse cover but looked it up on rave and it should be empty

Correct.

fog lights fit

Datatek

Well-Known Member

wammers

No longer with us, RIP

gfromleeds

Well-Known Member

davidg

New Member

gfromleeds

Well-Known Member

jacckk

Active Member

davidg

New Member

wil2813

Well-Known Member

gfromleeds

Well-Known Member

gfromleeds

Well-Known Member

wammers

No longer with us, RIP

gfromleeds

Well-Known Member

wammers

No longer with us, RIP

Similar threads