Disco 2 Fitting Air Bleed Valve Kit

Have been recommended to change this - is it straitghtforward. Assume it is the pipe towards the rear and nearest the wheel. Unscrew one end and carefully pull out the other?

Many thanks!

Maybe a bit more info .

Why was it recommended? by whom? which pipe exactly.

Cheers

Recommended by chap at Dingocroft when I was purchasing a new fuel filter to try to remedy my slightly misfiring Disco after injector harness replacement. Told me it might be worth cleaning/replacing so I bought a new one. I think there are four pipes coming off the top of the fuel filter housing etc

OK, Now it makes sense.

Which bit did you get, got a photo please?
Also recommend you download a copy of the rave workshop manual. As this shows where each pipe goes to etc.

Cheers

This also may help you to see what you will be changing.


Cheers

this bad boy - I'll try to find the Rave page!

yes, in the rear outer connection, pull back the dust cap, push the two tabs in on the the quick connector to release the pipe, replace the valve and push back the connector, job done

sierrafery said:

yes, in the rear outer connection, pull back the dust cap, push the two tabs in on the the quick connector to release the pipe, replace the valve and push back the connector, job done

Click to expand...

Many thanks!